Tag: atelierbrunette

  • COPENHAGEN

    COPENHAGEN

    Dear ones, I am so excited to write you this article in which I am presenting a knitting project for the first time.

    Actually this would be the 4th knitting project but alas I have not yet been able to show you the previous ones 😊.

    I washed and blocked it yesterday and couldn’t wait to tell you about it.

    .: The pattern

    This is the Copenhagen cardigan from PetiteKnit. You can find it in English or French.

    It is worked flat from top to bottom with a raglan to make the increases.

    The neckline is shaped with reduced ranks. The stitch used is jersey, with circular needles number 3.5 mm (for ribbing) and 4 mm.

    The pattern includes 7 or 8 buttons depending on the size used. Buttonholes are created at the end so it is not necessary to make them while knitting.

    Another detail, the Copenhagen cardigan is offered with pockets inserted in the front. The sleeves are worked in the round without seams.

    I really like this Danish designer, her descriptions are very clear and precise and she proposes several options for the wool to be used.

    .: The wool

    To make it I used two yarns, Lanivendole’s chic blend, composed of 60% Brogna wool, 20% alpaca and 20% mohair (50g – 225m approx.) color Nasturzi, and Knitting for Olive’s soft silk mohair, 30% silk and 70% mohair (25g – 225m approx.), color forest berry.

    As soon as I picked up the chic blend it seemed less soft than other wools I have purchased, but I assure you that after washing and blocking it is nice to wear, I tried it with a sleeveless top underneath and it doesn’t scratch my skin at all!

    I had heard so much about the softness of soft silk mohair from Knitting for Olive and I can only confirm.

    .: The Size

    The model is offered in sizes XS, S, M, L, XL or XXL.

    As a size I opted for a size S, with a recommended ease between 6 and 11 cm.

    .: The modifications

    Honestly being a novice I didn’t have the courage to make any changes to the pattern yet, but I must say that I like the cardigan as proposed.

    .: The difficulties

    I did not encounter any particular difficulties. I followed the description step by step, except for the pockets. PetiteKnit refers to an explanatory video (in Danish! But at least I find it useful to see the pictures) but I preferred to follow the explanations from Lize Tailor’s book (je deviens expert tricot).

    For a “top-down” assembly to create inserted pockets, I worked the stitches to the point where I wanted to insert the pocket (indicated in the instructions). Then I put the 22 stitches corresponding to the pocket opening on hold. I inserted a stitch marker and then on the needle I recreated the same number of stitches put on hold using the French cast on technique. I inserted a second stitch marker and continued to knit until the end of the round.

    Once the body and sleeves were finished, I picked up the waiting pocket stitches on the needle and worked them back and forth for the desired length of about 10 cm. I finally sewed the 3 sides of the pocket to the body of the cardigan.

    .: The cost

    To make the cardigan in size S, I used 4 balls of Nasturzi for EUR 11.90 each and 4 balls of Knitting for Olive Soft Silk Mohair – Forest Berry for EUR 7 each (shipping not included).

    For the buttons I chose the Swing – Terracotta – 15 mm diameter by Atelier Brunette for 1.30 EUR each.

    Total: 84.70 EUR.

    .: Would I knit it again?

    It is a very elegant and simple pattern that I would definitely make again. Not right away though because I have a myriad of other patterns in my head that I would like to knit!

    And what are your upcoming projects?

    🍎 See you soon ! 🍎

  • MINDY

    MINDY

    My, how time flies! I realized that I hadn’t written anything for a few months… it will be summer, you will say, the desire to enjoy the good weather and go out as much as possible… but this year, Luxembourg has been living up to its reputation… bad weather is quite natural β›ˆοΈ!       

    But let’s be positive! The cold allowed me to discover a new passion! Do you guess? πŸ™‚

    Don’t worry, I’ll tell you about it shortly!

    First I want to tell you about a couple of models that I sewed recently and that I LOVE! The first is the Mindy dress by Fibremood in a super burgundy flowery poplin, by Charlie Coud.  

    The model features a gorgeous square neckline. The realization of the straight cut gave me a little trouble.

    You have to raise the presser foot and snip into to the seam allowance of the sleeve + neck trim until just before the needle.

    Turn the garment, lower the presser foot down again and now stitch the slanted edge together, with the notches matching.

    The cut is essential to ensure a good square and I am always afraid to cut too much!!!!!

    At the level of sleeves I opted for the balloon version with elastic.

    In case the puffy sleeves were not of your taste, you can opt for a butterfly sleeve.

    The dress closes with an invisible side zipper of 20 cm. I chose a zipper that I had bought from Atelier Brunette that I had available 60 cm long and that I cut to adapt the length. As for the size I cut everything to my usual size but if I had to do it again I would add a couple of centimeters in length to be able to wear it at the office.

    What do you think?

    🍎 See you soon! 🍎